-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
A PCB Design Potpourri
In this column, I will be revisiting topics covered in some of my older columns and fleshing them out with new, updated information. In this job, I truly learn something every day, and I’m happy to share a few notable nuggets with you.
The Quote Process
Ultimately, whether it’s a quick-turn or standard lead-time job, customers would like to see all quotes back within a couple of hours, not a couple of days. Additionally, they want to see accurate quotes that take into account all additional processes. It’s never good when, once quoted, the fabricator comes back with additional costs for unforeseen processes. Again, this is why it is important to get a manufacturing review done if anything outside the norm is required on the drawing or quote. This includes a proper review of impedances to ensure that materials are available and the impedances work without requiring large variances in dielectric or line sizes, buy-offs for any deviations of material type or copper weights, etc.
Beyond the quote process, be sure that your fabricator is capable of all the processes necessary to ensure the board is built as expected. You want your board shop to be IPC-6012 Class 3 capable and ISO certified, and perhaps ITAR as well. Even if you can’t visit the shop for a physical qualification, send them a job to quote and see how they respond. A good fabricator will be diligent and get back to you within a few hours after completing a preliminary examination of the files, impedance calculations and proposed stackup if the board is impedance/dielectrically controlled. They should also be able to let you know right away if the job does not meet their process minimums and can’t be built. If deviations are allowed, a good fabricator will also have an alternative for many situations, such as a deviation for material type, starting copper weight, dielectrics or line sizes to be able to produce the job.
Read the full column here.
Editor's Note: This column originally appeared in the July 2013 issue of The PCB Design Magazine.
More Columns from The Bare (Board) Truth
The Bare (Board) Truth: My Top Six Design ChallengesThe Bare (Board) Truth: Via Basics
The Bare (Board) Truth: 5 Questions About Improving Thermal Management
The Bare (Board) Truth: Teaching the Next Generation—An Overview of Today’s University Courses
The Bare (Board) Truth: Fabrication Starts With Solid Design Practices
Board Negotiations: Design Rules and Tolerances
The Bare (Board) Truth: Eliminate Confusion
The Bare (Board) Truth: Getting on the Same Page—A Data Story