NASA Uses ORNL Supercomputers to Plan Smooth Landing on Mars
March 26, 2024 | Oak Ridge National LaboratoryEstimated reading time: 3 minutes
A U.S. mission to land astronauts on the surface of Mars will be unlike any other extraterrestrial landing ever undertaken by NASA.
Although the space agency has successfully landed nine robotic missions on Mars since its first surface missions in 1976 with the Viking Project, safely bringing humans to Mars will require new technologies for flight through the Martian atmosphere. But these technologies and systems can’t be comprehensively tested on Earth beforehand.
Since 2019, a team of NASA scientists and their partners have been using NASA’s FUN3D software on supercomputers located at the Department of Energy’s Oak Ridge Leadership Computing Facility, or OLCF, to conduct computational fluid dynamics, or CFD, simulations of a human-scale Mars lander. The OLCF is a DOE Office of Science user facility located at DOE’s Oak Ridge National Laboratory.
The team’s ongoing research project is a first step in determining how to safely land a vehicle with humans onboard onto the surface of
Composite animation showing autonomous flight trajectory using closed-loop flight control computed on Frontier. The vehicle descends from approximately seven kilometers altitude to one kilometer and decelerates from Mach 2.4 to approximately Mach 0.8 during this 35-second period. The top inset shows the RCS firing sequence and associated roll angle, which can also be observed as a subtle +-1-degree vehicle rotation in the main image. The top-right inset shows a farfield view of the trajectory, where the Martian surface is indicated by a Cartesian grid with a 1-kilometer spacing. The middle-right inset shows the throttle settings for each of the eight main engines, which decelerate the vehicle and also control pitch and yaw. The bottom-right image shows the vehicle pitch angle, which can also be observed in the main image. The main engine plumes are visualized using density weighted by the H₂O mass fraction, while the RCS jets are shown using density weighted by the N2 mass fraction with separate red/green colormaps depending on thrust orientation. Credit: Patrick Moran/NASA
“By its very nature, we don’t have validation data for this. We can do valuable but limited tests in ground facilities like a wind tunnel or on a ballistic range, but such approaches cannot fully capture the physics that will be encountered on Mars. We can’t flight-test in the actual Martian environment — it’s all or nothing when we get there. That’s why supercomputing is so critically important,” said Eric Nielsen, a senior research scientist at NASA’s Langley Research Center and principal investigator for the 5-year effort at the OLCF.
Unlike in recent Mars missions, parachutes are not part of the operation. Instead, the leading candidate for landing humans on Mars is retropropulsion — firing forward-facing rockets built into the craft’s heat shield to decelerate.
“We’ve never flown anything like this before. The fundamental question from the outset was, ‘Are we going to be able to safely control this vehicle?’” Nielsen said.
The reason that NASA is investigating retropropulsion rather than conventional parachutes is a matter of physics. Previous Mars landers have weighed about 1 ton; a vehicle carrying astronauts and all their life-support systems will weigh 20 to 50 times more, or about the size of a two-story house. Mars’ thin atmosphere — about 100 times less dense than Earth’s — won’t support a parachute landing for such a large craft.
“With a conventional vehicle, we fly through a very clean, predictable environment. All of that goes out the window with this concept, where we will be traveling through an extremely dynamic environment consisting of high-energy rocket exhaust,” said NASA team member and CFD expert Gabriel Nastac.
With guidance from NASA mission planners, the team formulated a multiyear plan consisting of increasingly sophisticated simulations aimed at the key question of controllability.
In 2019, the team conducted CFD simulations on the Summit supercomputer at resolutions up to 10 billion elements to characterize static vehicle aerodynamics at anticipated throttle settings and flight speeds ranging from Mach 2.5 down to Mach 0.8, conditions in which the vehicle’s rocket engines will be required for initial deceleration.
Suggested Items
Foxconn Announces Q1 2024 Financial Results
05/14/2024 | Foxconn ElectronicsIn the January-March quarter revenue hit NT$1.324 trillion, with key profit margins all improving. Earnings per share for the first three months of 2024 reached NT$1.59.
OSI Systems Receives Order for $9 Million to Provide Cargo and Vehicle Inspection Systems
05/13/2024 | BUSINESS WIREOSI Systems, Inc. announced that its Security division received an order from an international customer for approximately $9 million to provide the Company’s Eagle® M60 high energy mobile cargo and vehicle inspection systems including related service and support.
IDTechEx Explores Printed Electronics in Electrified and Autonomous Mobility
05/13/2024 | IDTechExElectrification, autonomy, and vehicle ownership saturation are causing a technological revolution in the automotive sector. These automotive meta-trends are driving drastic changes in electronic component requirements and present a high-volume opportunity for printed electronics to capitalize on.
BAE Systems and Eaton Expand Collaboration to Deliver Electric Drive Solutions for Heavy-Duty Trucks
05/08/2024 | PRNewswireBAE Systems, a leader in electric propulsion, and Eaton, a global power management company, are expanding their collaboration to include electric vehicle (EV) solutions for heavy-duty trucks.
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.