-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Growing Need for UHDI
November 30, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
Jan Pedersen of NCAB Group is deeply involved in IPC standards development surrounding ultra HDI and keeps his finger on the pulse of the industry surrounding this type of fabrication. With Asia still dominating this area, Jan sees the need for U.S. and European PCB fabricators to make the investment if they want to stay competitive.
Nolan Johnson: Jan, you’re very involved in UHDI design and manufacturing. What’s your perspective on these topics within the industry now, and where UHDI is going?
Jan Pedersen: There are seven to 10 factories globally that can produce what we call ultra HDI. The definition for UHDI is 50-micron and below track and gap. You can use subtractive methods down to, let’s say, 35 or 40 microns, and then when you creep down below that level you need mSAP or xSAP technologies.
That has been around for many years. It’s not really a new technology. It was introduced into the packaging or the component industry in the 1970s and ‘80s, but it was brought up again when Apple and others started to do smartphones. There are those factories that are involved in this, but they are factored for one customer, so it’s very hard for a smaller customer to get into UHDI, and most companies are smaller than Apple.
If you are a bit smaller, you don’t get access. It’s simple as that. I’ve tried it myself, tried to place an order with a big European PCB group that claims they have the capability. But when you have your Gerbers and your data and you want to produce boards there, they say, “Oh, sorry. This is basically for one customer,” and they don’t accept us putting their competitors, which could be anybody, into the same factory.
Johnson: Given that, what is driving the development of UHDI?
Pedersen: For us, it’s coming from telecom and 5G, and you assume we’ll see 6G. But quite a few of our customers come from these industries. We see that need growing in the automotive and medical industries, and I’m discussing it almost globally. I’m looking to see if there is any availability of production capabilities in the U.S. today. We don’t find it. There’s one factory in Europe that has limited capacity, and then the rest are in Asia and producing for the big names.
Johnson: Where does HDI stop and UHDI begin?
Pedersen: Let’s use the ultra HDI definition of 50 microns down. It’s subtractive down to approximately 40 microns.
Where we are today approximately on BGA pitch below 350 microns, we talk about pads of 140, and then you are basically into mSAP or substrate-like PCB technologies, whatever that is. There are quite a few technologies out there now that can be used. But we see that we are going from a subtractive into an mSAP level; this depends on where you are coming from and how far you are coming with the investments in your factory, because some of the factories that are producing mSAP have invested in imaging, AOI—everything needed for that resolution now.
When you have a subtractive in that factor, they can go quite far down here. But if you don’t have all the other investments and just go for mSAP, that doesn’t help you.
I’m saying this as background because you have this producibility level C in IPC-2226, where you have 50-micron track and gap. Everything below that is ultra HDI—substrate-like PCBs can be produced by either subtractive or SAP-related technologies. If you go below that again, down to 15 to 20 microns, you need an embedded trace substrate or similar technologies. Then of course you come to high-end IC substrates which are in single microns.
In the U.S. today for substrate-like PCB, it’s below 50 microns, not touching 20 microns, but maybe 35 or 40. When I had my Gerbers and asked for quotations, they said they couldn’t do it. They do have mSAP equipment, if you can call it that, or a process in-house, but have not yet invested in the imaging and AOI that is able to detect down to 20 microns. I think they stop somewhere around 35 today.
To read this entire conversation, which appeared in the November 2022 issue of PCB007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: The Driving World of e-Mobility with Indium
05/08/2024 | Real Time with...IPC APEX EXPOIn the competitive EV market, technology plays a crucial role facing the challenges of infrastructure. As Brian O'Leary explains, Indium's e-Mobility product suite includes proven solder and thermal management products for high reliability.
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.