-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 2 minutes
The Bare (Board) Truth: Eliminate Confusion
This column will address eliminating confusion that creates remakes both from the end-user/designer and the fabrication house. First, let’s talk about being clear about your intentions. What are some of the things that create miscommunication, lost time, and sometimes even remakes at the fabrication house of your choice? The first thing is querying the fabrication house for impedance numbers.
Let’s say you’ve asked for a material type on your drawing that is not either readily available or used by your fabricator. Here, you should expect the fabrication house to respond quickly and have all the deviations at once for you to review. This includes any impedance width changes, material types, or copper weights to produce the part. Any deviations regarding drawing notes such as wrap plate requirements that cannot be incorporated due to insufficient space or the extra etch compensation to meet the wrap plate requirement should also be addressed.
If your chosen fabricator comes back and says the material you have called out is not a standard stocked material for them, you are asking for a three-day turn. Giving you an alternative is great, but if by changing to the material they suggest your trace widths or spaces change to the point the part has to be laid out again, this can be very frustrating for the board designer.
To mitigate this from happening, give yourself and addition mil or two of space. This will allow the fabricator to resize the traces to meet your impedance and adjust dielectrics. For example, if you have designed the part as a 0.1-mm trace and space, this does not allow the fabricator to resize the traces without affecting the spaces. It may even require the fabricator to ask for a lighter starting copper weight to allow for a 0.5-mil change in trace width to still make the part producible.
This is where the etch compensation based on starting copper weight is key to remember when designing the part to allow for slight changes to either dielectric distance, starting copper weight, or trace width changes to meet your impedances. Having gone through all this, if the fabrication house does not state additional deviations due to the color of solder mask, material finish type, or even the material UL rating required, this is also frustrating for the designer. You should communicate with an engineering person at the fabrication house ahead of time to preclude these deviations from slowing down the part.
To read this entire column, which appeared in the February 2019 issue of Design007 Magazine, click here.
For more clarity in the design process, be sure to read and refer to Mark Thompson's "The Perfect Data Package," a concise book available at I-007eBooks.
More Columns from The Bare (Board) Truth
The Bare (Board) Truth: My Top Six Design ChallengesThe Bare (Board) Truth: Via Basics
The Bare (Board) Truth: 5 Questions About Improving Thermal Management
The Bare (Board) Truth: Teaching the Next Generation—An Overview of Today’s University Courses
The Bare (Board) Truth: Fabrication Starts With Solid Design Practices
Board Negotiations: Design Rules and Tolerances
The Bare (Board) Truth: Getting on the Same Page—A Data Story
The Bare (Board) Truth: Refining Output Data Packages for Fabricators