-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Designers Council Viewpoint: Rick Hartley
December 30, 2015 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Rick Hartley has been in involved in PCB design and design education for decades, so it’s no surprise that he started working with the IPC Designers Council early on. Now retired from his day job at L-3, Rick still teaches PCB design and shows no sign of slowing down. I asked him to discuss his work with the Designers Council, and what the group means to the design community.
Andy Shaughnessy: How and when did you get involved in the Designers Council?
Rick Hartley: I first learned about Designers Council at an IPC conference in the early 1990s. Shortly afterward, I was contacted by another central Ohio designer, Candice Antrett, of Battelle Research Institute. Candice was also interested in the DC and suggested we collectively start a chapter. Pete Waddell had Printed Circuit Design magazine do a mailing for us to help get the word out, and we have always been grateful for that generous act. We held our first meeting at Battelle, and were off and running. Our membership area was mainly Columbus, Dayton and Cincinnati.
Shaughnessy: What are the some of the most important benefits that the Designers Council offers designers, and the industry?
Hartley: For those chapters that are still going strong, the benefits are massive. There is NO formal education in PCB design. For the most part, colleges do not teach the profession. Some colleges barely even mention the existence of PC boards, much less tell their students anything meaningful. IPC and the active DC chapters are doing a wonderful job of training the industry about the many issues we need to understand; I don’t mean just designing to make boards function, but incredibly important issues like DFX (i.e., design for fabrication, design for assembly and design for testability). For people who do not live in the area of an active chapter, there is the IPC APEX EXPO conference and other wonderful educational resources, such as PCB West Design Conference and online webinars from multiple sources, including IPC.
Shaughnessy: What's exciting about the DC today?
Hartley: All the items mentioned earlier. And, of course, there is the CID (Certified Interconnect Designer) and CID+ (Advanced) training and certification. This can be a very valuable asset to designers and EEs. One of the greatest benefits I derived from chapter membership was networking. I could write a book on the value of networking with others in your profession. Those folks lucky enough to still have a local chapter and those who network at conferences know exactly what I mean.
To read this entire article, which appeared in the December 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/07/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Happy’s Tech Talk #28: The Power Mesh Architecture for PCBs
05/07/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12 (and more), down to four. Besides reducing direct processing steps, yield will increase as defect producing operations are eliminated.