Effective Characteristic Impedance


Reading time ( words)

In a typical interconnect, there lie multiple places where capacitance plays a factor in the signal integrity. This includes the driver and receiver output/input capacitance, as well as the packages, vias, and the transmission lines. Failing to optimize these parameters can often lead to unwanted reflections, excessive radiated and or conducted emissions, and sometimes failure of components and systems.

Reflections can occur anytime there is an impedance mismatch on the line. Sources of mismatches are plentiful and include trace width changes, vias, stubs, reference plane changes, and even the so-called fiber weave effect. In this case, a trace can encounter a different dielectric constant depending on whether it is routed over glass or the epoxy resin in the dielectric material. 

In this investigation, it is the capacitive contribution of the different components that are of interest, and how they affect the characteristic impedance the driver sees. 

To read the rest of this article, click here.

Share

Print


Suggested Items

Development of Flexible Hybrid Electronics

08/14/2019 | Weifeng Liu, PhD, Flex
This article will present a hybrid manufacturing process to manufacture FHE systems with a two-layer interconnect structure utilizing screen printing of silver conductive ink, filled microvias to connect ink traces at the different layers, and use of the traditional reflow process to attach the semiconductor chips to the printed substrates.

Preparing to Enter the Workforce With PCB Design Experience

04/22/2019 | Nolan Johnson, PCB007
Nolan Johnson recently spoke with Alex Burt, a computer engineering student at George Fox University, at a well-attended college career fair on the GFU campus in Newberg, Oregon. In the interview, Alex discusses his PCB classwork, challenges of design, and how it has impacted his internship experience as he prepares to enter the workforce upon graduation in the spring semester of 2019.

Faster Board Speeds Demand Constraint-Driven Design

06/19/2018 | Ralf Bruening, Zuken
Using powerful constraint techniques can be a double-edged sword. While the design process is made much safer by including constraints, it is all too easy to over-constrain the design and make it impossible to complete routing and placement. Even paper design guidelines can make products uneconomic to produce unless a great deal of engineering knowledge is applied during the design.



Copyright © 2019 I-Connect007. All rights reserved.