-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Overcoming Component Selection and Sourcing Challenges
April 14, 2021 | John R. Watson, AltiumEstimated reading time: 2 minutes
Anyone who calls themselves a “geek” has probably uttered those famous words from Star Trek's opening:
“Space: the final frontier. These are the voyages of the starship Enterprise. Its five-year mission: to explore strange new worlds, to seek out new life and new civilizations. To boldly go where no man has gone before!”
Most PCB designers would agree that we know precisely how Captain James T. Kirk felt because we often feel the same way when starting a new design. We are launching into something that we ultimately don't know how it will turn out. We don't know the difficulties we'll face or problems we’ll need to fix. While we can control the design process and use our skills to make reasonable decisions, there are often huge hazards awaiting us in the "unknown." One worsening problem for all designers is component procurement.
Every component has both static and dynamic information: static is the parametric information, schematic symbol or footprint; dynamic data is the sourcing. Actually, it is incredibly dynamic and constantly changing, which can cause significant problems in your design. Component availability is so volatile that it changes by the hour.
It doesn’t make it any easier to select components at the beginning of a project as you don’t know what final components will ultimately end up in your design. From the start of a design until you eventually drag it across the finish line, significant problems can occur and it’s anybody’s guess what might happen.
One of the standard rules in design and engineering is not to make assumptions as this introduces a tremendous amount of risk into the design process. But, it seems this is what’s happening when we select specific components in this current environment.
Causes of Component Shortages
If we were using the defense readiness condition (DEFCON) alert state to illustrate the component shortage’s seriousness and severity, we would easily be sitting at a DEFCON 2. Component shortages are now impacting the electronics industry in a significant way. I have seen reports that several automobile manufacturers have temporarily shut down because of substantial component shortages. I see it as the perfect storm, where it’s not caused by one particular reason, but a combination of situations. This was a hot topic at the end of 2019, yet here we are again. I don’t think we fully recovered from the initial component shortage as the root causes still exist and have become even more severe.
Impact of the COVID Pandemic
The pandemic’s impact caused a worldwide slowdown of the electronics industry as the massive industrial machine came to a halt. It affected the supply change on multiple levels—not just with manufacturers and suppliers, but it went so deep that even the mining of raw materials was halted. Nothing like this had ever happened before, and the industry was not ready. Everyone wanted to see the industry re-open, but in some ways, this has actually further complicated the issues, and it remains to be seen how the electronics industry will operate in the post-COVID economy.
To read this entire article, which appeared in the April 2021 issue of SMT007 Magazine, click here.
Suggested Items
Shane Whiteside of Summit Reflects on Today's PCB Landscape
05/08/2024 | I-Connect007 Editorial TeamSummit Interconnect began as a printed circuit board manufacturing company just eight years ago and has seen impressive growth organically and through acquisition. Summit President and CEO Shane Whiteside takes a few moments to share his thoughts on the growing PCB industry in the United States.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Micross, Sital Announce Global Manufacturing & Distribution Partnership
05/07/2024 | Micross Components, Inc.Micross Components, Inc., a leading global provider of mission-critical microelectronic components and services for high-reliability aerospace, defense, space and industrial applications, is pleased to announce our exclusive partnership with Sital Technology (sitaltech.com), the leader in MIL-STD-1553 IP cores, specializing in integrated FPGA solutions.
Worldwide Silicon Wafer Shipments Dip 5% in Q1 2024
05/07/2024 | SEMIWorldwide silicon wafer shipments decreased 5.4% quarter-over-quarter to 2,834 million square inches in the first quarter of 2024, a 13.2% drop from the 3,265 million square inches recorded during the same quarter last year, the SEMI Silicon Manufacturers Group (SMG) reported in its quarterly analysis of the silicon wafer industry.
Nolan’s Notes: Coming to Terms With AI
05/07/2024 | Nolan Johnson -- Column: Nolan's NotesHow fast do things move in the world of data analytics? Here’s an example. We’ve been planning this issue on artificial intelligence for the past few months, and, in fact, I had already written this column about a month ago. Then I went to IPC APEX EXPO and upended it all. I originally had compared AI to drag racing in that (CPU) horsepower and new (data) vehicles have steadily delivered higher performance competition. That seemed pretty accurate given how generative AI models dominated the popular media with amazing results—and sometimes spectacular crashes.