-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Rising Star Award Winner: Radu Diaconescu
April 5, 2021 | Radu Diaconescu, Swio.ioEstimated reading time: 2 minutes
Last year’s IPC APEX EXPO, which took place in sunny San Diego, seems to have taken place in a different world. This was a world where talks were held in front of a large crowd, not a monitor, and travelling to the other side of the world wasn’t considered a reckless risk.
By February 2020, however, we were starting to grasp the seriousness of the situation. Back then, there were a lot of things that we didn’t know, and more importantly, there were a lot of things that we had no clue that we didn’t know. The concept of “knowing what you don’t know” or figuring out the areas where one lacks knowledge is probably as important as acquiring the knowledge itself.
Coming “back to the future” and attending the IPC APEX EXPO 2021 virtually, it seems that we as an industry start to finally understand and discover the things that we don’t know. From the integrity and resilience of our supply chain to the failed digital transformations of the past, it seems that the electronics manufacturing industry starts to realize that change is difficult, but also inevitable.
Changes, Revolutions, Evolutions
Ever since the term “Industry 4.0” was coined back in 2015-16, there were several technologies that seemed to lead the way to the “promised land” of transformation. We believed that big data, IoT, IIoT, AI, ML, autonomous vehicles and so many other technological advances would radically change our operations and deliver the holy grail of billions of dollars of savings. While being a firm believer in the benefits of all these technologies, the reality, as we were brutally reminded in the past 12 months, is much more complex. At the end of the day, to paraphrase Travis Hessman’s keynote speech, digital transformation was never supposed to be a revolution, but rather an evolution.
There’s no silver bullet that will magically solve all of our problems and I think the 56% of manufacturing companies that are still waiting for the right use case for digital transformation or the 60% of digitization projects stuck in the “proof of concept” stage are a testament to that. Revolutions are tough, but evolution is a continuous process. Instead of focusing on Industry 4.0, 5.0, or whatever might come next, we should adapt our mindset to one of a continuous evolution and treat digital transformation the same way we treat quality.
To read this entire article, which appeared in the 2021 edition of Show & Tell Magazine, click here.
Suggested Items
The New Chapter: Attracting ‘Generation Green’
03/28/2024 | Hannah Grace & Paige Fiet -- Column: The New ChapterIn the electronics industry, we talk a lot about sustainability in terms of recruitment and retention of the next generation of engineers. But what if the key to sustaining the industry long into the future is through the more common definition of the word? What if, for just a moment, we think about sustainability in terms of the environment and what we as an industry are doing to care for it? Because, if you weren’t aware, Gen Z cares tremendously about the environment and the actions companies are taking to preserve it. Without Gen Z joining the electronics industry’s workforce, we won’t be able to sustain the industry for much longer.
Accenture Invests in Sanctuary AI to Bring AI-Powered, Humanoid Robotics to Work Alongside Humans
03/27/2024 | BUSINESS WIREAccenture has made a strategic investment, through Accenture Ventures, in Sanctuary AI, a developer of humanoid general-purpose robots that are powered by AI and can perform a wide variety of work tasks quickly, safely and effectively.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.