Managing Footprints With Integrated EDA Tools


Reading time ( words)

Electronics companies are always under great pressure to continually grow and innovate. In addition to navigating ever-accelerating design cycles, they must also address and overcome generational complexities associated with their products, the underlying components they use, and the human capital accountable for delivering on time and on budget. Electronics firms can ill afford the time and resource inefficiencies associated with manually correcting design errors, poor library data integrity, or other inconsistencies leading to missed deadlines or even costly re-spins.

The quality of eCAD libraries—or, more specifically, the quality of the underlying logical and physical models—plays a pivotal role in stemming the challenges of delivering a successful electronics product to market. In fact, the eCAD library affects every process from PCB layout to PCB manufacturing and assembly.

The Siemens PartQuest cloud-based application is a gateway to a large collection of component technical content for electronics design. This addresses five critical factors relative to best-in-class PCB library solutions:

1. High-quality eCAD model content.
2. Symbol and footprint creation.
3. Library management.
4. Standards.
5. Integration with Xpedition and PADS Professional.

In October 2020, Siemens released the PartQuest Vault, consisting of eCAD models (symbols and footprints) for over 1 million parts. These pre-made models are entirely created, validated, and maintained by Siemens. A rules engine consisting of validation logic and thousands of checks are run against model content to confirm construction correctness, which provides end-customers with peace-of-mind when using this content. Further, the Vault is parametrically or keyword searchable, which simplifies the identification of the precise part to meet a product design’s requirements, and the Vault is expected to contain 100 million parts by the end of 1QCY21.

There are inevitably instances where premade eCAD model content might not be readily available. For these scenarios, users have one of two options. First, users can request model content be constructed; turnaround time is typically less than 24 hours. This is presently a free service. Second, PartQuest has a robust part-builder capability. Whether a simple op amp or significantly more complex flatpack with multiple terminal groups, the “Create Footprint” capability guides users through easy-to-follow wizards and templates (including tool tips) to create content that is correct by construction.

To read this entire article, which appeared in the February 2021 issue of Design007 Magazine, click here.

Share

Print


Suggested Items

We Are Stronger by What Unites Us

02/11/2021 | Stephen V. Chavez, PCEA, and Tanya Martin, SMTA
PCEA President Stephen V. Chavez and SMTA Global Executive Director Tanya Martin co-wrote this letter to the editor in response to a recent PCB007 column.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/15/2021 | Andy Shaughnessy, Design007 Magazine
Hard to believe that a year ago, I was getting ready to attend DesignCon and IPC APEX EXPO and wondering if this Novel Coronavirus was going to cut into attendance from the Pacific Rim. Now, we’re accustomed to virtual trade shows. They’re not ideal, but they’re the best we can do while meeting in person is not possible. We’ve learned to adapt.

Brad Griffin Discusses Cadence’s New Transient Solver Technology

10/26/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy speaks with Brad Griffin, product marketing director for Cadence Design Systems, about their new Clarity 3D Transient Solver, which is designed for system-level EMI simulation. Brad explains how the new solver, based on the company’s matrix technology, can yield results 10 times faster than existing solvers when simulating IC packages, PCBs, and SoIC designs.



Copyright © 2021 I-Connect007. All rights reserved.