Words of Advice: Long Component and Laminate Lead Times


Reading time ( words)

In a recent survey, we asked the following question: What advice do you have regarding the current supply chain issues? Here are just a few of the answers, edited slightly for clarity.

  1. Quote alternates.
  2. Speed up laminate manufacturing.
  3. Plan for readily available materials in advance of issuing the PO for the design.
  4. Order early!
  5. If the end customer is large, use their power.

Share

Print


Suggested Items

Technically Appropriate Material Choices are Key to Design Success

05/16/2019 | Nolan Johnson, I-Connect007
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. I-Connect007’s Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.

AltiumLive Munich: Day 1 Keynotes

01/28/2019 | Pete Starkey, I-Connect007
The weather forecast was wrong! Despite my apprehension and winter clothes, there was very little snow at the Hilton Munich Airport. It could have been any season of the year inside the splendid convention facility, which was also the venue for the second European AltiumLive design summit. AltiumLive brought together a family of over 220 electronics engineers and designers eager to learn from top industry experts and applications specialists who were equally eager to share their knowledge and experience freely.

Calculation of Frequency-Dependent Effective Roughness Dielectric Parameters for Copper Foil Using Equivalent Capacitance Models

01/02/2019 | Marina Y. Koledintseva, Metamagnetics Inc.*, and Tracey Vincent, CST of America
Knowledge of the correct parameters of laminate PCB dielectrics refined from any copper foil roughness impact and the proper foil roughness characterization are important constituents of modeling high-speed digital electronics designs.



Copyright © 2019 I-Connect007. All rights reserved.