-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mentor’s Cristian Filip Discusses His Award-winning DesignCon Paper
March 21, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 4 minutes
During DesignCon, I met with Cristian Filip, a senior product architect with Mentor, a Siemens business. Cristian had just received word that his paper had won a DesignCon Best Paper award—his second such award in three years. I asked Cristian to discuss his paper and how this technology can help improve manufacturing yields at high volumes.
Andy Shaughnessy: Congratulations, Cristian. You’ve written a paper that just won a DesignCon Best Paper Award. Can you tell us about yourself and the paper?
Cristian Filip: Sure. I joined Mentor in 2014. I work in the product architecture group and am involved mostly with analysis solutions. Over the last few years, I’ve co-authored about six DesignCon papers—two of them winning the Best Paper Award. One paper won in 2016 jointly with Vladimir Zdorov—one of our developers. In 2018, it was a collaboration between Hamburg University, Cisco, and Mentor.
Both of those papers that won the Best Paper Award centered around high-speed serial links, running at 28 gigabits per second. And they used channel operating margins as a figure of merit for estimating channels performance. In 2017, I had another DesignCon paper on the same area of interest, and we showed how to optimize channels while accounting for manufacturing reliability. At that time, we used design of experiments (DOE) as a method for optimization along with artificial neural networks. As a next step in the paper from 2018, we explored some improvements to the method. This time, we introduced the polynomial chaos expansion with the stochastic testing method to improve our way to optimize those links.
In this paper, "Efficient Sensitivity-Aware Assessment of High-Speed Links Using PCE and Implications for COM," we basically compared three different methods. One was based on Monte Carlo sampling, the second on DOE, using the response surface method, and the third on PCE. We showed that this new method not only reduces the number of required simulations from thousands to about 50 but also the simulation run time.
There is an additional benefit to this method because it provides better insight into what can affect the performance of the channels. This new method based on the polynomial chaos expansion with stochastic testing has the advantage of reducing the number of experiments or simulations required for channel modeling and channel optimization. It also provides additional information about the performance of various components of the channels, which are very useful in the debugging process and improving the overall performance of the channel.
Shaughnessy: How does this all work?
Filip: We took an example to show how we can apply this method based on a 100GBASE-KP4 for a channel, which is basically a backplane and two different blank cards, and we showed how various routing parameters, material parameters, and cheap I/O characteristics affect the performance of the channel. We also showed how we could optimize the link by using the proposed method.
Further, we compared the results from channel operating margin against the traditional diagrams based on eye height and eye width opening and showed that they actually correlate very well. As a basis for this new method, we started by using an open-source, publicly available library, and we made some improvements to that method. This method can be applied by anyone; it’s not related to specific tools or flow, so it’s very flexible and proved to be very efficient in our experience.
Shaughnessy: So, you’ve optimized a way for people to deal with high-speed links?
Filip: Correct, especially in high-volume manufacturing where we define the failures per million. We’re always looking at minimizing the number of failures per million. If you’re going to build a million units, you need to figure out how many will probably fail in high volume and minimize that so you can improve the yield.
Shaughnessy: And the variability seems to be a big thing too.
Filip: Yes, it is. The good thing is we typically know the distribution for the various manufacturing processes. In general, they have either Gaussian or uniform distribution, and we can apply the distribution to predict the performance of the channels. We create a model that allows us to apply a Monte Carlo type of analysis to further estimate that performance of the channel in high volume statistically.
Shaughnessy: Cool. That sounds like a good paper. Is there anything else you want to add?
Filip: I want to give a special thanks for our collaborators from Hamburg University and Cisco. It was a great experience working together with seven people from three different organizations spread across the globe.
Shaughnessy: Being that this is your second award since 2016, you seem to know what you’re talking about.
Filip: I hope so. I also want to thank Mentor for providing the opportunity to participate in this type of competition. DesignCon a great conference where so many talented people come together and exchange lots of interesting technical experiences.
Shaughnessy: Thanks so much, Cristian.
Filip: Thank you, Andy.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.