-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Cherie Litson on ECAD/MCAD and Training the Next Generation
March 7, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 6 minutes
Cherie Litson, CID+, was one of the instructors at AltiumLive Munich. I asked her to discuss some of the topics she covered in her class, and what the future of PCB design will look like. How are we going to pass down all of this design knowledge to the next generation?
Andy Shaughnessy: Good to see you, Cherie. What is your title anyway?
Cherie Litson: That’s a good question. It keeps changing (laughs). I don’t know what to call myself. I’m a master circuit board designer and instructor. How’s that? That’s the closest title I can think of.
Shaughnessy: Great. So, you taught a class yesterday. What are some of the topics you covered?
Litson: One of the things Altium asked me to do was work with David Haboud to add a designer perspective to the multiboard design capabilities within Altium. And I thought, “Well, I’ve only tinkered with that a little bit, but I’ll check it out more, and we’ll see what it looks like.” And then it dawned on me. This is a great tool, but if nobody knows why they need it, then it doesn’t go anywhere. Then, what are you going to do with it? I looked at it and thought, “Why would I need this tool for my designs?”
I started to think about different designs I’ve done over the years and various companies I’ve worked with and how they would structure things. A lot of people start a project in the middle and then work down a little. “Let’s design this and that circuitry,” but nobody has a top-down view of things. They’re not looking at it from the point of view of, “Let’s start with what I need to do for all of my interconnects to make sure that I have the right interconnect for the right time.”
Both mechanical and electrical engineers didn’t think it was their job. The electrical engineers were creating everything as J1 and P1 on every single circuit and not defining what was connecting. When I looked at that, I thought, “You have to start with a scheme,” which is why I decided to start with this presentation. What’s the important thing when you’re doing multiple boards in a system? Having system design. Start there. And what does that mean in terms of individual projects? It means looking at how we interconnect these together and having a scheme for that, whatever that scheme becomes.
Also, you should know the practical applications as well as what the existing standards are. Most people don’t know the existing standards for those interconnections, but they exist. MIL specifications have had them for years for wiring and cabling. Then, people get to a circuit board and forget. They think, “That’s just the end of a cable I’m plugging into,” and it goes to that next extent. That’s what I talked about.
Shaughnessy: Did you get any interesting questions from the attendees?
Litson: Yes. People asked about the details of the interface, which is a good thing. There were two other interesting questions. One was about the ECAD/MCAD interface, and I think it still has a way to go. There are still some bugs we need to work out with that, but I think that Altium is open to making it work, which makes a difference too. They listen to the feedback, and we can come up with some good solutions that way. I appreciate that. A lot of companies don’t work on the MCAD and the ECAD side. “No, it’s your problem,” is usually the attitude. I like that Altium goes, “Okay, it’s a problem. Let’s solve it.”
Cherie and Altium's David Haboud teamed up for a class at AltiumLive in Munich.
Another interesting question I had was about connectors. How do you do the schematic side of the connector? And how do you represent that if you just have pins as a connection? My answer was to use a multi-part (1-5 pins per part) in the schematic for most connectors—maybe not every one, but for most of them. Because then you can swap the pins, you can assign them appropriately, and do it quickly and easily without redrawing the entire schematic page. Many engineers don’t even think about that; they just draw a box, stick some pins on it, and try to put everything from the circuit to that box.
Shaughnessy: Let the designer figure it out.
Litson: Right. Or they’ll do an airline net and just change the net name, but then you can’t see the interconnections of what that’s going to. Maybe that’s not a good idea. It depends on your scale and whether you have swappable pins on your connector or not and how you want to set that up. But they don’t even think about getting good schematic flow.
Shaughnessy: What do you think are some of the biggest challenges for new designers joining the industry today?
Litson: We’re seeing more and more engineers take on the responsibility of doing layout instead of designers, which is what it always has been—people who learned by being on the job and getting it done. We have engineers coming in who think they know how to do something, but realize very quickly they don’t and don’t know where to go. I think that’s the biggest problem that I see currently. In our industry, we have electrical engineers. They might be brilliant electrical engineers, but they’re trying to translate down to a mechanical environment in a manufacturing environment with absolutely no training or aptitude. That’s another issue; not every electrical engineer should do a circuit board. Some love it, but others should not even touch one.
Shaughnessy: It makes you want to say, “Stay away from the CAD tool!”
Litson: Yes. Go think theoretically and I’ll make it work for you. And that’s important for a company to understand when they’re assigning tasks to different people. You want to make sure that you know who has the aptitude to do what, and then get the proper training for people in your company. I’m getting to a point where I would like to retire and do more trainings, even corporately. And while I love doing circuit boards, I think I’d rather just show people the best ways to go about doing it and let them do it.
Shaughnessy: Share the knowledge.
Litson: Absolutely. I mean, I’m not going to be around for very long.
Shaughnessy: Yes, a lot of us are heading up that way.
Litson: I just turned 68 in December, and 20 years ago, I survived cancer.
Shaughnessy: I didn’t know that. Wow. Congratulations! I’m glad you’re still around.
Litson: Me too! I’m really glad I survived those 20 years because I’ve learned so much, and I want to be able to pass that on to others. Because who knows how long we all have? It comes up and surprises you. I lost a brother—the youngest of our family—who was only 52. He died of a sudden heart attack, and that really jarred me too. We don’t know how long we have, and it doesn’t matter what your age is or anything. You can survive drastic stuff or have something hit you out of the blue. I think that the industry needs to look at those of us who have been here for a long time. There are a lot of really good people, and new designers need to start learning. We’ll keep passing that information on to the younger group.
Shaughnessy: To ensure that the new designers don’t wind up just getting tribal knowledge, right?
Litson: Yes, because otherwise, it’s gone and you’re going to have to relearn it all over again the hard way.
Shaughnessy: Well, here’s to you, sticking around and teaching for a few more years, Cherie! Thanks for talking to me.
Litson: That’s the plan! Thank you, Andy. Anytime.
Suggested Items
Real Time with…. IPC APEX EXPO 2024: Innovation and Collaboration at EPTAC
05/06/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and EPTAC Vice President Leo Lambert discuss the partnership between EPTAC and Blackfox, their program alignment, and future expansion plans. Leo introduces Burak Gokmen as the new "leader of the pack." The focus then shifts to Nano Dimensions' 3D printed circuit boards, emphasizing the need for proper documentation and training.
The New Industry: Will the Growth Continue?
04/30/2024 | I-Connect007 Editorial TeamHow sustainable are the primary financial models in the United States regarding PCB fabrication shops? In this interview with economic experts Shawn DuBravac and Tom Kastner, we explore what’s happening with U.S. printed circuit board shops in today’s market, how consolidation affects the industry, and what can be done.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.