-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Birds of a Feather: PCB Carolina and the RTP Designers Council
January 10, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
The PCB Carolina show in Raleigh, North Carolina, has grown quite a bit in the past decade from a local show to a regional event that now draws attendees and exhibitors from all over the U.S.
At PCB Carolina 2018, I met with show founders Tony Cosentino, Randy Faucette, and Lance Olive, who are all employees at the Better Boards service bureau in nearby Cary. I asked the trio to discuss the show’s history, its relationship to the Research Triangle Park (RTP) North Carolina Chapter of the IPC Designers Council, as well as the show’s tremendous growth over the past few years.
Andy Shaughnessy: I'm here at PCB Carolina. Tony, why don't you start and tell us about the RTP Chapter of the IPC Designers Council.
Tony Cosentino: I got involved with the Designer Council in 2002. I was on the board of directors for a year, then ran for VP and did that for a year. Then, I took on the president spot.
I learned about the mission of the Designers Council from the leaders that came before me. The mission is to network with our industry, promote our business (PCB design) as a profession, and teach people technical skills and share information.
We've taken that to heart and offer as many technical opportunities as we can for as little a cost as we can to keep the community engaged. It’s all about networking.
Shaughnessy: Now, tell us how the RTP chapter figures into the launch of PCB Carolina.
Cosentino: Around 2000, in the early years of the IPC Designers Council, our local RTP chapter put on very small trade shows, about two hours long with maybe eight or 10 vendors, and it was to get PCB design software vendors and manufacturers in front of the Designers Council members, so that they could see new technologies, capabilities, and roadmaps.
That grew into something bigger over the years. In 2005, we came up with the idea of growing this into a trade show, and in 2008, we moved into the Raleigh Convention Center. Randy came up with the name PCB Carolina. It was his baby from the start. Maybe I'll let Randy speak to that.
Randy Faucette: Sure. We took this show from something small—just meeting space at a local hotel—and moved to the convention center, which had more space. That meant we wouldn’t be limited to the main software companies and a couple of fabrication shops, but could really expand it to benefit all of the engineering disciplines and put companies that had special products or services in front of potential customers.
We wanted to do it without large, expensive booth space to keep it to more of a tabletop show where the small million-dollar company could be represented next to a billion-dollar company. There are many local companies in this very high-tech area. There wasn't a PCB show here in the RTP area, so we felt like there was an opportunity to do something about that.
To read this entire interview, which appeared in the December 2018 issue of Design007 Magazine, click here.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.