American Standard Circuits Discusses New RF/Microwave eBook


Reading time ( words)

During DesignCon 2018, I met with Anaya Vardya and John Bushie of American Standard Circuits. Anaya and John recently co-wrote an eBook, published by I-Connect007, titled The Printed Circuit Designer’s Guide to Fundamentals of RF/Microwave PCBs. We discussed their goals and the scope of this handy microbook, which features plenty of information that even high-speed digital designers can benefit from.

 

Andy Shaughnessy: How are you all doing? It's good to see you again.

Anaya Vardya: Great to see you, Andy.

Shaughnessy: You’ve brought a copy of your new book, The Printed Circuit Designer’s Guide to Fundamentals of RF/Microwave PCBs. It's been great working with you guys on the book, and a lot of fun. I learned quite a few things when I was editing it.

Vardya: I hope you did.

Shaughnessy: That was the point of it, right? So what made you decide to write a book?

John Bushie: Basically, we wanted to take all the experience we’ve gathered working with engineers throughout the years. Anaya has been in the industry for 30+ years. I have been around RF microwave for over 20 years, both on the fabrication and the laminate side of the business. Since we get to work with so many designers on all their varieties of projects, it was nice to be able to share some of that knowledge with a wider audience-

Shaughnessy: Especially now that the digital people are seeing a lot of the same problems that the RF guys have been dealing with.

Bushie: The data rates go up, the relative frequencies go up. They're dealing with the same challenges.

Vardya: I think one thing that is important to note is that this is our second book. We actually started out writing a book on flex and rigid-flex. And we had a lot of designers who were asking us a lot of questions. We have to go back to the designers and say, “We need you to redo some things.” Everybody was collectively losing a lot of time in the process.

To read this entire article, which appeared in the April 2018 issue of Design007 Magazine, click here.

Visit i-007eBooks to download your copies of American Standard Circuits' micro eBooks today:

The Printed Circuit Designer's Guide to...Fundamentals of RF/Microwave PCBs

The Printed Circuit Designer's Guide to...Flex and Rigid-Flex Fundamentals


Share


Suggested Items

Jan Pedersen: CircuitData Enhances Current Data Formats

04/11/2018 | I-Connect007 Editorial Team
During the Design Forum at IPC APEX EXPO 2018, Jan Pedersen, senior technical advisor for the PCB broker Elmatica, gave a presentation on CircuitData. The language is designed to help facilitate other design data transfer formats such as Gerber, ODB++, and IPC-2581. Jan spoke with Managing Editor Andy Shaughnessy and Contributing Technical Editor Happy Holden about how this open language works with the existing data formats, as well as the need to eliminate paper documents from design process, and how the industry can help shape this open-source language.

Martin Cotton Discusses Ventec’s New Book and Low-Loss Materials

04/11/2018 | Andy Shaughnessy, Design007 Magazine
During DesignCon 2018, Andy Shaughnessy sat down for an interview with Martin Cotton, director of OEM projects for Ventec. Martin was a PCB designer for years, so he has experience on both sides of the desk. They discussed Ventec’s reasons for coming to DesignCon, their expansion into low-loss materials, and Ventec’s new I-Connect007 book, The Printed Circuit Designer’s Guide to Thermal Management with Insulated Metal Substrates.

Part 2: EIPC’s 2018 Winter Conference in Lyon, Review of Day 1

02/19/2018 | Pete Starkey, I-Connect007
We continue with the rest of Pete Starkey’s report on Day 1 of the EIPC Winter Conference in Lyon, France. Included in this segment are presentations by Ventec, Ericsson, TTM and others, plus photos of their evening tour of Alstom.



Copyright © 2018 I-Connect007. All rights reserved.