-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Fault-Finding: It’s All About Prevention, not Blame
September 18, 2017 | Kelly Dack, CID+, EPTACEstimated reading time: 1 minute
There are thousands of things that can go wrong during the design and manufacture of a PCB assembly. One might say that it is an absolute miracle when a PCB goes through all of its phases—design, fabrication and assembly—and operates successfully!
But what happens when something goes wrong? The flow of an entire project can be disrupted when a problem is discovered on the PCB. What happens when a short or an open circuit is discovered; a part lead won’t fit into a hole or an entire connector pattern is designed backward? Murphy’s Law ensures us that PCB issues are discovered at the most critical periods of a PCB’s design and manufacturing cycles.
So, it is not a question of if a problem might be found, but when. A designer must be aware that their management and their customers may be less in tune with the technical aspects of the why their design is running late or doesn’t work. But like the Queen of Hearts in “Alice in Wonderland,” there are some management and customer cultures out there who naively attempt to resolve problems by seeking out the culprits and shouting “Off with their heads!”
Seasoned PCB designers have learned that jumping to a conclusion without carefully examining all of the possibilities is not only a waste of time, but can be devastating to the carefully cultivated relationships. A quick read of almost any psychology article on “fault” or “blame” will coax the reader away from adding to a problem by placing fault or blame on others. It is far more productive to examine yourself first before shining forth as part of a solution. Focus on process rather than personalities.
Companies in the PCB industry have adapted a widely accepted methodology for sleuthing out the source of problems which might occur during a product development cycle: root cause analysis. Root cause analysis (RCA) began in the 1950s as a study by NASA and had its origins in rocket design. RCA methods are used to methodically identify root causes of events, rather than to simply address the symptomatic result.
To read this entire article, which appeared in the August 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.