-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Evolution of PCB Design and Designers
February 8, 2017 | Barry Matties, I-Connect007Estimated reading time: 2 minutes
According to Rainer Asfalg of Altium, VP Sales EMEA, EDA companies owe it to their customers to provide much more than just a standard design tool. I met with Rainer at the recent electronica show to discuss the continued evolution of the design process towards automation, and what this might mean for the education and overall requirements of PCB designers going forward.
Barry Matties: Rainer, in our pre-interview discussion, you gave us a little bit of your background and it sounds comprehensive. You bring a lot of insight from multiple disciplines and product types, which gives you a good, diverse foundation to draw from.
Rainer Asfalg: Yes, I think this is important for understanding the markets and understanding customers. It puts me in a position to make the right judgment on what our customers are really asking for and what challenges they face.
Matties: You're also a printed circuit board designer. You have hands-on practical experience. How many years did you design for before you started working for the factories?
Asfalg: Five years. I worked at a service bureau, mainly doing classical digital design, but I also got involved in analog and RF applications.
Matties: That's a broad spectrum. Being in a design bureau gives you a great look at what's going on and a cross-section of current technology. One of the things that we hear about designers is that they don't have a deep understanding of the PCB manufacturing process. From the perspective of a designer, what do you think about that statement?
Asfalg: It’s correct. That’s why an EDA company's responsibility is to put automation in place to ensure quality, while freeing up designers from time otherwise spent on preparing manufacturing data. On top of this, when we look at how the profession has evolved, what actually is a designer today?
Matties: That's a great question. Can you answer that?
Asfalg: These days we deal with a completely different type of designer. In the past we had electrical engineers who captured the design on a piece of paper or, further down the line, were responsible for schematic entry. Then they handed this over to a PCB design department or a service bureau. Those PCB designers are now my age or older. So these classic PCB departments have gradually faded away. The new designers are now responsible for much, much more. It is not simply about capturing the design, rather they are responsible for the test strategy, the PCB design, and the manufacturing as well.
To read this entire article, which appeared in the January 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.
Real Time with... IPC APEX EXPO 2024: Final Finishes and IC Substrate Manufacturing
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont and Richard DePoto, Uyemura's Business Development Manager, engage in a comprehensive discussion about the positive aspects of the show, the benefits of RAIG in final finishes, and the hurdles faced when upgrading your surface finish. Also discussed are the role of Uyemura's MEC pretreatment agents in IC substrate manufacturing and the importance of collaboration and knowledge sharing.
Women MAKE Awards Recognizes GlobalFoundries’ Jennifer Robbins and Katelyn Harrison for Manufacturing Excellence
04/24/2024 | GlobalFoundriesThe Manufacturing Institute (MI)—the workforce development and education affiliate of the National Association of Manufacturers—honored two outstanding women from GlobalFoundries (GF) at their annual Women MAKE Awards. Jennifer (Jenny) Robbins, Senior Director, Central Facilities, was recognized as a 2024 Women MAKE Awards Honoree, while Katelyn Harrison, Senior Integration Engineer, was honored as an Emerging Leader.
GlobalFoundries Commits to Achieving Net Zero Emissions and Carbon-Neutral Power by 2050
04/23/2024 | GlobalFoundriesGlobalFoundries (GF) is furthering its commitment to sustainable operations and fighting climate change with the announcement of two new long-term goals to achieve net-zero greenhouse gas (GHG) emissions and 100% carbon-neutral power by 2050.