-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mike Creeden: Care and Training of Your Designers
September 21, 2016 | Barry Matties and Judy Warner, I-Connect007Estimated reading time: 2 minutes
The I-Connect007 team recently visited San Diego PCB Inc. and received a warm welcome from CEO Mike Creeden and his youthful-looking (relatively speaking) team of designers. Creeden spoke with Barry Matties and Judy Warner about what it takes to run a successful design service center, how to properly care for the PCB designers of today and tomorrow, and why IPC’s design training is paramount when training a new designer.
Barry Matties: Mike, tell us a little about yourself and San Diego PCB.
Mike Creeden: San Diego PCB was incorporated in June of 2003, so we are in our 13th year of existence, and as a professional, I am in my 40th year of doing this. That makes me sound old, but I don't feel old.
Matties: It does sound old. But you’re only as old as you feel, I guess.
Creeden: Well, here's why I don't feel old, it’s because I love what I do.
Matties: I guess it depends on when you started, because if you started when you were 40...
Creeden: Oh, I started when was two years old (laughs). No, I’ve had my 60th birthday, so...
Matties: Ah, so you started in your twenties?
Creeden: I started in my twenties, when I got out of the military. I was in the military in a short-range tactical nuclear missile unit. It was known as one of the deadliest and stupidest weapons ever made. People would say, "Not a good day to shoot this thing," and they'd check the wind. But I had a technical propensity back in the day, and so when I came out of the military, shortly thereafter, I started in this profession and there's been no looking back. I've had the privilege to work for a lot of different companies, from big-name companies to a lot of the different CAD companies. So I had the opportunity to learn a little bit about the business, the software that the business runs on, for PADS, now Mentor, and Cadence and Zuken.
What I found out is that, regardless of how good I did as a designer, I didn't always control my destiny, so to speak. I concluded that rather than just going to the companies, it made more sense for me to create a good CAD environment and let the companies come to me, and that's worked well. It works well because I take care of the designers, and that shows, and the customers like that. It's been the staple that gives our business a corporate signature and a corporate culture.
Matties: Just for context, tell us a little bit about San Diego PCB, what the mission is, and what you guys do.
Creeden: We have a mission statement, because that's what they say you're supposed to do when you have a corporation: have a corporate culture based on a mission statement. The mission statement is, essentially, to have revision 1 work, and I want quality, and I want to do it the best I can on time. Those are the three things that most people say, "You can have two of the three." I’m sure you've heard that said. To the best degree we can, we're trying to do all three. There's nothing magical about it; it's just good work and determination to try to do that.
To read this entire article, which appeared in the August 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
Two Industry Rising Stars Recognized at IPC APEX EXPO 2024
04/17/2024 | IPCTwo of the industry’s best and brightest were presented with an IPC Rising Star Award at IPC APEX EXPO 2024 in recognition of their leadership roles and support of IPC standards, education, advocacy, and solutions to industry challenges. Award recipients were Naim Kapadia and Michael Schleicher.